Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
No license shall become effective until the required certificate of insurance has been submitted and is on file with the city. the contractor license free is (your free) per year.
By checking ?I agree,? you agree and acknowledge your electronic signature is valid and binding in the same force and effect as a handwritten signature. By checking ?I agree ?U agree and understand that it will be your responsibilty to ensure at all times compliance with the applicable laws of the State of Texas, Federal Government, and the City of Lampasas with respect to the permit which may be issued for this project. In accordance with plans and specifications submitted herewith and in full conformity with the provisions and regulation of all ordinances of the City of Lampasas, the City reserves the right to approve or disapprove the project requested based solely upon the representations of the applicant. The Building Inspector is hereby given authority to make inspections of the project site at any time during the progression of the work and stop all work not in conformity with this permit, the plans and specifications or any laws of the State of Texas, Federal Government or the City of Lampasas.The construction permit shall become null and void if work or construction authorized herein is not commenced within six (6) months of if work is suspended of abandoned for a period off six (6) months at any time after the work is commenced.
Panels/modules are located so that there is a 3-foot wide clear access pathway from the eave to the ridge on each roof slop where panels/modules are located. (IFC 605.11.3.2.1)
If panels/modules are placed on both sides of a hip or valley that are located no closer than 18 inches to a hip or valley. If the panels are located on only one side of a hip or valley that is of equal length, then the panels can be placed directly adjacent to the hip or valley. (IFC 605.11.3.2.3)
Panels/modules are located so that there are two 3-foor wide access pathways from the eave to the ridge on each roof slope where there are panels/modules install. (IFC 605.11.3.2.2)
Panels/modules are located no higher than 3 feet from the top of the ridge in order to allow for fire department smoke ventilation operations. (IFC 605.11.3.2.4)
Access pathways are located at a structural sound location capable of supporting the load of fire fighters accessing the roof. (IFC 605.11.3.2.1)
This field is not part of the form submission.
* indicates a required field